Got a new Haltech UC10 and need to hook it up to your RX7? Hate cutting up factory connectors? We have what you need. Fully plug and play harness for connecting your Haltech UC10 dash to your FD RX7. No cutting or splicing required! Includes the listed allocations by default, but configuration is possible.

The UC10 Features 14 Inputs; 10 voltage based inputs and 4 SPI inputs. SPI's can be used for pulsed signals and switches. It also features 4 outputs.

Default Configuration:

Inputs:

• Left turn signal
• Right turn signal
• High beam
• Dimmer/Park lights
• Speedo Signal and Ground
• Coolant Level Sensor
• Oil Level Low Indicator
• Brake Light (Handbrake and brake fluid low)
• ABS Warning Light
• Fuel Gauge
  
• Seat Belt Light
• Rear Defog Indicator
• Button 1 
• Button 2 
• Alternator Excite 

Outputs:

• DPO1 to OEM speedo output

OPTIONAL: 

• Tach Signal (Not required if you have a Haltech ECU)
  
• Fuel Level low Indicator
• Cruise Control Indicator 
• Additional Buttons

Buttons are wired to a breakout dtm-04 plug. If you would like a flying lead dtm receptacle or the plug and pins please add that in the notes. These can be assigned to control screens, alarms, or anything else in NSP.

Includes the following connectors: 

• 1x AMP 34p connector to dash
• 1x Dash connector to plugs 3 and 4
• 1x common connector for plugs 1 and 2
• 1x DTM-04 connector plug for buttons
• 1x DTM-04 receptacle for CAN connection to ECU 
• 1x DTM-06 for spare outputs and 5v/signal ground reference. 

These are made to order, lead time is about 1-2 weeks. These are made for dashes that are mounted in place of the OEM cluster and are roughly 18 inches. We do offer an extended harness for dashes mounted elsewhere, the extended length harnesses are 36 inches from the OEM dash connectors to the dash connector. Additional length is available if required, please contact us.

Does not connect to the automatic transmission gear selector dash connector, but will work with an automatic vehicle minus gear selector.

Works with S6 and S7 LHD and RHD (1993-2002 RX7). If you have a boost gauge from factory the OEM dash configuration is a little different, please let us know in the notes section below.

If you select custom configuration, please include your desired config in the notes or contact us with the configuration you would like.